Mud Grabbing Tool


mud grabber

 

          GRABBER LOGO 1

 

We offer Mud grabbing tools, drilling fluid sample tools, fluid sampling tools for oil and gas industry. The mud grabbing toolds like the Mud Grabber is the best our there...it revolutionizes the way drilling fluid sampling is done.  A professional tool for procuring cleaner and more consistent samples for The oil and natural gas industry,

In drilling operation in the oil and gas industry, drilling fluid sampling is absolutely necessary. The drilling fluid needs to be in perfect so constantly pulling samples from tanks to be checked is a full time job. The common tool is make shift from miscellaneous items that are located close to the rig, a broomstick, a plastic coffee can screwed to it...etc. After a few uses, the coffee cans will detach from the stick, resulting in safety concern and down time.

Our product is made from an unbreakable polypropylene guaranteed not to break ever. In the process of chemical analysis and weight and viscosity tests one of the problems is a contaminated sample, meaning your reservoir has small pieces from earlier samples dried to the inside of the coffee cans being used to retrieve your sample. A contaminated sample will give you this wrong chemical analysis or breakdown of drilling fluid and can compromise your entire drilling process.
Our product has a smooth inner surface which makes it easy to clean thus eliminating the possibility of a sample contamination.
Mud Grabber has an pour spout in order to eliminate spills.
A pitfall operators may encounter, is the chance of the anything falling into the drilling fluid and causing equipment to go down. Our product is made of a lightweight material and it's will float in any drilling fluid.
In an industry striving to professionalism and safety, most drilling companies have stoped the use of any type of home made tools. However, this "coffee can" is still in use mainly because there was no professionall made tool in the market. if you want to minimize the possibility of sample contamination and equipment failure in your drilling operation get a mud grabber on the job today...SEE PICTURES BELOW:

 

Mud_grabber

Call or email for price. thanks!

 

Products forworld-wide solutions to offshore, petrochemical, nuclear, gas and power plant industry with all grades of Stainless Steel, 316,304,Duplex Steel, Nickel Alloys, Titanium, Carbon Steel, Alloy Steel.
                                                  
                              
2 third party inspection by Lloyd's were performed successfully on our
products.

possible urgent production (emergency production) and express deliveries by air, boat or road

FLANGES

Dimensions:
                                     
Flanges, Rings, Discs and Special Forgings:                                            
Dimensions from 1/2'' till 120''
Dimensions from DN15 till DN3000
Pressure from 150 lbs, 300 lbs, 600 lbs, 900 lbs, 1500 lbs till 2500 lbs
Pressure from PN2,5, PN6, PN10, PN16, PN25, PN40, PN63 (PN64), PN100, PN160, PN250, PN320 till PN400

 Material grades:

ASTM / UNS: 304, 304L, 316, 316L, 321, 316Ti, 304H, 321H, 316H, 347, 347H, 317, 317L, 310(S), 309(S), 314,
316LMo, 410, 446, duplex S31803 / F51, Duper Duplex S32750 and S32760 / F53 / F55, 904L, 6Mo / S31254 / F44
/ 254SMO, F60, A105, A106B, A106C, A350 LF2, A350 LF3, A335 P11 (F11), A335 P12 (F12 / 1.7335 /13CrMo44),
A335 P22 (F22), A335 P91 (F91), A335 P92 (F92), WB36 (1.6368 / 15NiCuMoNb5-6-4), C22.8 (1.0460),
20SiMn2MoVA, 34CrNiMo6, 12Cr1MoV, A222 Gr2, 16Mn, 16MnD, 15CrMo

DIN /EN: 1.4301, 1.4306, 1.4307, 1.4401, 1.4404, 1.4541, 1.4571, 1.4948, 1.4878, 1.4919, 1.4550, 1.4449, 1.4438,
1.4828, 1.4833, 1.4841, 1.4435, 1.4436, 1.4006, 1.4749, 1.4462, 1.4410, 1.4501, 1.4539, 1.4547, 1.4529
                                                  
Nickel 200 (UNS N02200), Monel 400 (N04400), Inconel 600 (N06600), Inconel 625 (N06625), Incoloy 800 (N08800),
Incoloy 825 (N08825), Hastelloy C276, Hastelloy C22, Alloy 20 (N08020), Alloy 28 (N08028), Titanium Grade 1,
Titanium Grade 2, Titanium Grade 5, Curponickel and Zirconium, Tantalum

Flanges & Adapters:                                                                                                
                                                                                                                                                                 
Welding neck flange                     Socket weld flange                            Lap joint flange
Threaded flange                            Long welding neck flange                 Orifice flange
Block flange                                  Anchor flange                                  Swivel ring flange
Swivel flange                                Reducing flange                                Weldoflange
Nipoflange                                    Elboflange                                        Compact flange
AWWA flange                              Taylor flange                                    Sweepoflange
Tower flange                                 Flangeolets                                       Sweep-outlets
Lateral outlets                                Elbow outlets                                    Reinforced header branches
Rider flange                                  Tema flange                                      Vessel flange
Expander flange                            Misalignment flange                           Hanger flange
Forged nozzle                               Reinforced nozzle                              Contoured nozzle
Swept nozzle                                 Flanges as per drawing                      Forged nozzle flange
Flanges for reactors                       Spades and spacers                          Figure eight
Spectacle blind                              Forged bleed / drip rings                    Pressed flanges
SAE flanges                                  O-ring flange                                     Wind tower flange

PIPE and PIPEFITTINGS (SEAMLESS & WELDED)

 

Elbows LR 45�, 90�, 180� or special radius                    
Elbows SR 45�, 90�, 180� or special radius                               
Special bends (special radius, cold or hot formed)
Reducing tees / Reducing T-pieces
Concentric reducers
Eccentric reducers
Caps
Stub ends
Collars
Crosses
Special fittings

Seamless WP-S
Welded WP-W
Welded 100% X-Ray  WP-WX
TIG, PLASMA, SMAW

DN welding fittings:
DN15 till DN2500
Thickness 1,6mm till 80mm
Radius till 3000mm

 ASTM welding fittings:                                                            
From 1/4'' till 98''
SCH5S, SCH10S, SCH10, SCH20, SCH30, SCH40S, SCH STD, SCH40, SCH60, SCH80S, SCH XS, SCH80,
SCH100, SCH120, SCH140, SCH160 to SCH XXS
Also client specific heavy wall

MATERIAL GRADES BELOW

ASTM / UNS: 304, 304L, 316, 316L, 321, 316Ti, 304H, 321H, 316H, 347, 347H, 317, 317L, 310(S), 309(S), 314,
316LMo, 410, 446, duplex S31803 / F51, Duper Duplex S32750 and S32760 / F53 / F55, 904L, 6Mo / S31254 / F44
/ 254SMO, F60, A105, A106B, A106C, A350 LF2, A350 LF3, A335 P11 (F11), A335 P12 (F12 / 1.7335 /13CrMo44),
A335 P22 (F22), A335 P91 (F91), A335 P92 (F92), WB36 (1.6368 / 15NiCuMoNb5-6-4), C22.8 (1.0460),
20SiMn2MoVA, 34CrNiMo6, 12Cr1MoV, A222 Gr2, 16Mn, 16MnD, 15CrMo

DIN /EN: 1.4301, 1.4306, 1.4307, 1.4401, 1.4404, 1.4541, 1.4571, 1.4948, 1.4878, 1.4919, 1.4550, 1.4449, 1.4438,
1.4828, 1.4833, 1.4841, 1.4435, 1.4436, 1.4006, 1.4749, 1.4462, 1.4410, 1.4501, 1.4539, 1.4547, 1.4529
                                                  
Nickel 200 (UNS N02200), Monel 400 (N04400), Inconel 600 (N06600), Inconel 625 (N06625), Incoloy 800 (N08800),
Incoloy 825 (N08825), Hastelloy C276, Hastelloy C22, Alloy 20 (N08020), Alloy 28 (N08028), Titanium Grade 1,
Titanium Grade 2, Titanium Grade 5, Curponickel and Zirconium, Tantalum

 

SOCKET WELD FITTINGS

 

Tee, Cross, Full Coupling, Half Coupling, Reducing Coupling, Pipe Cap, Head Bushing, Hex Head Plug, Square Head Plug, Union, Hex Nipple, Street Elbow, Bull Plug, Boss, Swage Nipple, Pipe Nipple, Adapter, Union (Male X Female), Branch Outlet, Lateral Outlet, Weldolet, Sockolet, Threadolet, Nipolet, Elbowlet, Sweepolet, Tee, Cap, Elbow, Insert Weldolet, Brazolet, Coupolet, Nipo Flange.

MATERAIL GRADES BELOW

ASTM / UNS: 304, 304L, 316, 316L, 321, 316Ti, 304H, 321H, 316H, 347, 347H, 317, 317L, 310(S), 309(S), 314,
316LMo, 410, 446, duplex S31803 / F51, Duper Duplex S32750 and S32760 / F53 / F55, 904L, 6Mo / S31254 / F44
/ 254SMO, F60, A105, A106B, A106C, A350 LF2, A350 LF3, A335 P11 (F11), A335 P12 (F12 / 1.7335 /13CrMo44),
A335 P22 (F22), A335 P91 (F91), A335 P92 (F92), WB36 (1.6368 / 15NiCuMoNb5-6-4), C22.8 (1.0460),
20SiMn2MoVA, 34CrNiMo6, 12Cr1MoV, A222 Gr2, 16Mn, 16MnD, 15CrMo

DIN /EN: 1.4301, 1.4306, 1.4307, 1.4401, 1.4404, 1.4541, 1.4571, 1.4948, 1.4878, 1.4919, 1.4550, 1.4449, 1.4438,
1.4828, 1.4833, 1.4841, 1.4435, 1.4436, 1.4006, 1.4749, 1.4462, 1.4410, 1.4501, 1.4539, 1.4547, 1.4529
                                                  
Nickel 200 (UNS N02200), Monel 400 (N04400), Inconel 600 (N06600), Inconel 625 (N06625), Incoloy 800 (N08800),
Incoloy 825 (N08825), Hastelloy C276, Hastelloy C22, Alloy 20 (N08020), Alloy 28 (N08028), Titanium Grade 1,
Titanium Grade 2, Titanium Grade 5, Curponickel and Zirconium, Tantalum

 

WELDED PIPES

 

 Outside diameter: from 0,5mm till 2400mm
Thickness:            From 0,8mm till 60mm
Thickness:            SCH5S till SCH XXS          
Length:      Till 12000mm
Super size welded pipes (above 24'', big size, heavy wall)
Welded heat exchanger tubes
Welded U-tubes / Welded U-bended heat exchanger tubes
Welded tubing (imperial and metric) (BWG-S / SWG-S)
EFW, ERW, DSAW, TIG, PLASMA, SMAW


                                                  
Nickel 200 (UNS N02200), Monel 400 (N04400), Inconel 600 (N06600), Inconel 625 (N06625), Incoloy 800 (N08800),
Incoloy 825 (N08825), Hastelloy C276, Hastelloy C22, Alloy 20 (N08020), Alloy 28 (N08028), Titanium Grade 1,
Titanium Grade 2, Titanium Grade 5, Curponickel and Zirconium, Tantalum

SEAMLESS PIPES

 

Outside diameter:        from 0,5mm till 914mm      
Thickness:              form 0,8mm till 50mm
Outside diameter:        1/8'' till 36''
Thickness:                      SCH5S till SCH XXS
Length:                Till 12000mm
Super size seamless pipes (above 24'', big size, heavy wall)
Seamless heat exchanger tubes
Seamless U-tubes / Seamless U-bended heat exchanger tubes
Seamless tubing (imperial and metric) (BWG-S / SWG-S)


                                                  
Nickel 200 (UNS N02200), Monel 400 (N04400), Inconel 600 (N06600), Inconel 625 (N06625), Incoloy 800 (N08800),
Incoloy 825 (N08825), Hastelloy C276, Hastelloy C22, Alloy 20 (N08020), Alloy 28 (N08028), Titanium Grade 1,
Titanium Grade 2, Titanium Grade 5, Curponickel and Zirconium, Tantalum.

PLATES

Type 304              1.4301 (EN Steel Number)            S30400 (UNS) 
Type 304L            1.4307 (EN Steel Number)            S30403 (UNS)
Type 316              1.4401 (EN Steel Number)            S31600 (UNS) 
Type 316L            1.4404 (EN Steel Number)            S31603 (UNS)

UNS S31803 / S32205 / 1.4462
Super Duplex S32750
Super Duplex S32760

Pressure Vessel Plates


ASME SA516 Gr. 70 

ASTM A516 Gr. 70 

EN 10028-3 P355NH 

EN 10028-3 P355NL1 

EN 10028-3 P355NL2 

BS 1501 223 490B LT30 

BS 1501 224 490B LT50 

BS 1501 225 490B LT50 

ASME SA537 Class 1 

ASTM A537 Class 1 

ASME SA516 Gr. 65 

ASTM A516 Gr. 65 

ASME SA516 Gr. 60 

ASTM A516 Gr. 60 

EN 10028-3 P460NH

EN 10028-3 P460NL1

EN 10028-3 P460NL2 

 

Boiler Plates / Pressure Vessel Plates

ASME SA516 Gr. 60 

ASTM A516 Gr. 60 

ASME SA516 Gr. 65 

ASTM A516 Gr. 65 

EN 10028-2 P265GH

EN 10028-3 P275NH 

BS 1501 161 430A 

BS 1501 161 430B 

EN 10207 P265S 

 

ROUND BARS & BILLETS

ASTM / UNS: 304, 304L, 316, 316L, 321, 316Ti, 304H, 321H, 316H, 347, 347H, 317, 317L, 310(S), 309(S), 314,
316LMo, 410, 446, duplex S31803 / F51, Duper Duplex S32750 and S32760 / F53 / F55, 904L, 6Mo / S31254 / F44
/ 254SMO, F60, A105, A106B, A106C, A350 LF2, A350 LF3, A335 P11 (F11), A335 P12 (F12 / 1.7335 /13CrMo44),
A335 P22 (F22), A335 P91 (F91), A335 P92 (F92), WB36 (1.6368 / 15NiCuMoNb5-6-4), C22.8 (1.0460),
20SiMn2MoVA, 34CrNiMo6, 12Cr1MoV, A222 Gr2, 16Mn, 16MnD, 15CrMo

DIN /EN: 1.4301, 1.4306, 1.4307, 1.4401, 1.4404, 1.4541, 1.4571, 1.4948, 1.4878, 1.4919, 1.4550, 1.4449, 1.4438,
1.4828, 1.4833, 1.4841, 1.4435, 1.4436, 1.4006, 1.4749, 1.4462, 1.4410, 1.4501, 1.4539, 1.4547, 1.4529
                                                  
Nickel 200 (UNS N02200), Monel 400 (N04400), Inconel 600 (N06600), Inconel 625 (N06625), Incoloy 800 (N08800),
Incoloy 825 (N08825), Hastelloy C276, Hastelloy C22, Alloy 20 (N08020), Alloy 28 (N08028), Titanium Grade 1,
Titanium Grade 2, Titanium Grade 5, Curponickel and Zirconium, Tantalum

 

Testing and Quality Assurance:
                                                                                                                                 
Several testing is possible:                                       
X-Ray examination                                ASME VIII, DIV1, UW-51  /  EN10246-10

Hardness testing                                    NACE MR0175  /  NACE MR0103  /  EN ISO6506-1  /  ISO15156 /
                                                                                                                                  ASTM E10                                                                                
Liquid dye penetrant testing               ASTM E165  /  EN10246-11

Ultrasonic testing                                 ASTM E213  /  ASTM A999  /  ASTM A388  /  ASTM A578  / 
               EN10246-6  / EN10246-7
Eddy current testing                            ASTM E426  /  ASTM A999  /  EN10246-2  /  EN10246-3

Hydrostatic testing                               ASTM A999  /  EN10246

Mechanical testing                               ASTM A370

Chemical analysis                                  ASTM A751

Tension test / Tensile testing             ASTM A370  /  ASTM E21

Flaring test                                             ASTM A999  /  EN10216-5

Flattening test                                       ASTM A999  /  EN10216-5

Grain size test                                        ASTM E112

Microstructure examination               ASTM E562

Macroscopic examination                   

Intergranular corrosion testing (IGC)       ASTM A262 practice E  /  EN ISO3651-2 Method A  /  ASTM G48

Huey Test                                               ASTM A262 practice C   

Oxalic Acid Etch Test                            ASTM A262 practice A

PMI Spectrum analysis (Positive material identification)              Niton / Spectro                                      
Ferrite testing (max. 3% on the weld / base material)         Feritscope MP30
Impact testing at room temperature or -196�C                   ASTM A370  /  ASTM E23  /  EN10045-1        
Roughness examination / Rugosity                                       Mitutoyo  
WPS/PQR                                                                                  ASME IX / EN15614                                   
Visual inspection
Dimensional inspection
Ring gage check                     
Go no go check                       
Metallurgical tests
Sulphur/carbon analyses         
Magnetic particle examination
Heat treatment diagrams        
Stabilizing heat treatment       
Special mechanical properties 
NORSOK requirements         
MESC requirements
Fumigation                                                                     
certificate EN10204/3.1 and EN10204/3.2